High-quality cleaning of products of any complexity without dirt and surface damage. Leave a request and find out the price for F-Clean laser paint cleaners.
An efficient method of removing contaminants without extra spending or consumables
Laser technology is already being used in a wide range of manufacturing and business applications. More and more areas are appearing. Find out in this article how a laser device works and what the requirements are for its operating conditions.
Pokkels specialists have developed laser system options for all sizes of applications: from a handheld satchel for small tasks and working at heights to an automated laser cleaning system with non-stop operation. All F-Clean laser systems are equally effective at cleaning surfaces. The main difference between them is the amount of power, which affects the cleaning speed.
Before cleaning begins, the operator sets the width and power of the laser beam. The laser light is then sent to the metal surface. The layer of paint and other contaminants is removed in layers by evaporation. The thickness of the layer affects the speed of cleaning: a thicker layer takes longer to remove. There is no heating and no damage to the surface being cleaned in the process.
Local cleaning. The F-Clean laser can be used to locally clean metal surfaces for repair work, painting, welding and other product manipulation.
Work in the air without waste. The laser machine is the most environmentally friendly way to clean because it leaves no byproduct contaminants in the form of abrasive, dirt and chemicals. Cleans glass and outdoor tiles, metal surfaces from paint and natural contaminants.
Treats antique appliances and objects. Thanks to non-contact surface treatment, laser can remove paint and corrosion marks from thinned metal and clean non-disassembled and fragile objects.
Cleaning of special machinery and parts. The F-Clean device allows you to remove paint from products of all sizes, treat corrosion spots, remove traces of rust, and work at heights.
Pokkels laser cleaning systems require no consumables. Only electricity at the rate of 1 kW per 1 m².
Our equipment has laser hazard class 4. Laser radiation does not cause burns if exposed to the body area for a short time. To protect your eyes during operation, you must wear the special goggles that come with the unit.
With proper use, it has a lifespan of 100,000 hours. Care of the lens is very important to the longevity of the unit. It must be wiped down after each use of the laser, otherwise dirt will accumulate on it and may cause it to malfunction. If the protective lens is damaged, it can be replaced.
Our devices do not require any special maintenance. Warranty and post-warranty service is performed at our production facilities.
Pokkels laser equipment is quick and easy to set up for work. Models with a gun have external parameter controls: power, frequency and width of the laser beam.
Automatic laser systems are set up on the built-in touch screen of the instrument or on an external computer. A list of recommended settings can be found in the equipment description.
Our devices are powered by the mains by default. It is possible to additionally equip the cleaning system with a battery pack. However, such an addition will significantly increase the weight of the entire laser system, which may lead to a loss of mobility.
The laser beam width range is from 10 to 100 mm. Changing the width slightly affects the performance of the device, since the power does not change. The beam width affects the cleaning technique and its result. For example, the small width of the radiation will help to process the surface of a complex shape more accurately.
The settings of the laser systems make it possible both to clean surfaces without damage and to create structures with complex morphology, drawings or inscriptions on the surface. For example, thanks to the complex geometric craters that form as a result of machining, rather than the rounded shape as after abrasive blasting, the surface has excellent adhesion properties.
Depending on the operating modes of the equipment, slight changes in the surface layer to a depth of a few microns may occur. Surface heating is insignificant.
You may evaluate the operation of the devices in our demonstration room. We can also conduct an on-site demonstration at your facility.
Our laser devices are assembled from quality components and materials that ensure long life of the equipment, including emitters from IPG Photonics Corporation, a world leader in laser technology. You not only get reliable equipment with a working life of 100,000 hours, but also a 2-year warranty and maintenance.
Do you have any questions?
Fill in your details and we will call you back as soon as possible
By leaving a request, you give your consent to the processing of personal data
or call us at +36-19-994-636
Fill in your phone number, we will call you back shortly and answer your questions
By leaving a request, you consent to the processing of personal data.
Fill in your contacts, a specialist will call you back as soon as possible and answer your questions
By leaving a request, you consent to the processing of personal data.
Fill in your contacts for a lease calculation. We will send all information within one hour during office hours.
By leaving a request, you consent to the processing of personal data.
Fill in your contacts, we will send all information about prices and specifications within an hour during business hours
By leaving a request, you consent to the processing of personal data.
Fill in your contacts and we will contact you shortly to agree on a convenient demonstration time
By leaving a request, you consent to the processing of personal data.
Fill in your contacts to get a brochure. We will send all information within one hour during office hours
By leaving a request, you consent to the processing of personal data.
Our manager will contact you shortly.
Please, check the form data and try again.